"Hunt Farms has been using the Magnum for nearly a decade to side-dress corn at 8–10 mph between the V2 and V6 stages. “We decided on the Magnum because it allows us to get nitrogen to the plant during the growing season in a short window of time. Side-dressing 4,000 acres each y...dquo;
Yes, you can do whichever best fits your operation. If you take the seal out, you must grease every 50 hours. If you leave the seal intact, fill the wheel assembly with grease before using. No need to grease again until you replace the bearing.
Doug Gronau experienced high winds that flattened parts of his corn to the ground. Because of the damage, he was not able to harvest the flattened stalks; therefore, come planting season, Gronau planted directly into the mangled stalks without any tillage. Gronau was impressed with his Yette...fore.
"Spring strip-till has proven challenging for us in the past. We want to create an ideal seedbed just hours ahead of planting with no previous tillage. Since we face the challenges of wet soil and increasing amounts of residue, we wanted a unit that was less restrictive of residue...nce."
The spring-loaded Yetter Generation III Cutting Coulter fits many applications. Equipped with exclusive poly-plastic spring insert for extra down pressure.
rn"We concluded that for our no-till operation, we needed to get fertilizer deeper into the ground. Because the Yetter injection system places the fertilizer in the ground, we don't lose nitrogen through nitrification or because it sits on the top of the residue. They've provided a big cost ...s."rn
Prevent drag chains from flipping up on closing wheels and store them when they aren’t needed with the 6200 Drag Chain Shield from Yetter Farm Equipment.
Most likely the engine oil level is too low. Check the engine oil level and add oil as necessary. The oil level must be on the “full” mark to engage the oil level sensor.
Hello from YetterCo.com! This website uses cookies.
We use cookies to continuously improve our services and visitor experience. Additionally, we set cookies for visitors on social media sites to track performance. By continuing on this website or clicking "Ok" we will assume that you have read this information and consent to receive cookies on our website. For more information visit our website's Privacy Policy.
