Sorry! Page not found!

Perhaps you were looking for...

Search

• How fast should I be planting?

  /customer-support/faqs?id=5

  You should be planting at 5–5.5 mph. Speed affects seed spacing and depth unless you have a high-speed planter.

• Great job of lifting and redistributing the residue

  /products-testimonials?id=71

  rn"I tested a roller harrow and compared the results to that of the Yetter Rotary Hoe. I like the Rotary Hoe better. It does a great job of lifting and redistributing the residue, but it doesn't break off and level the crowns and standing stalks."rn

• 3400/3500 Standard Rotary Hoe & Min-Till Rotary Hoe

  /customer-support/manuals?id=108

  Rotary Hoe

• Results satisfied even our most particular producer

  /products-testimonials?id=54

  rn"Farmers who have been running chisel plows want to be able to succeed in corn-on-corn with no tillage, and this prompted us to look at an anhydrous toolbar that could get through residue. We turned to Yetter Manufacturing's SharkTooth® wheels. The results satisfied even our most parti...e."rn

• 2967-035 Row Cleaner for No-Till Coulters

  /products/27-plantermount-row-cleaner-combos/303-2967035-row-cleaner-for-notill-coulters

  The Yetter 2967-035 Row Cleaner is designed to pair with no-till coulters or operate as an independent floating row cleaner. Learn how it works with a variety of OEM factory coulters.

• How much tension should I run on my spiked closing wheels?

  /customer-support/faqs?id=10

  rn rn Usually zero tension or first notchrn rn Adverse conditions may require more tensionrn rn Full length of the spike should be in the soilrn

• It did a really nice job of laying the stalks over, crushing them, and starting the decay process

  /products-testimonials?id=79

  For harvest, Mike France used the 5000 Stalk Devastator™ attached to his corn head to knock over and crush corn stalks, testing its effectiveness for Yetter. "When Yetter came at the end of the harvest to take it off, I told them I wanted it back!" said Mike.rnFor his 2,200 acres of st...all."

• 5000-029B, -030B, -032B, & -038 Stalk Devastator™ – 30"/Non-Chopping/Compression Spring Model for Case IH 4400 Series 6/8/12 Row Folding Or Rigid Corn Heads

  /customer-support/manuals?id=149

  rnFits models 4406 or 4408 Rigid and Folding or 4412  Case IH/ New Holland 980CR Corn Heads

• I wanted a custom-built, small planter

  /products-testimonials?id=27

  rnAs a first-year farmer with a small acreage, Mike Sottile turned to Yetter Manufacturing for the company's 71 Series Planter Units. "I went to my local equipment dealer looking for a reasonable planting setup. I wanted a custom-built, small planter. The Yetter planter units were not too la...r!"rn

• Knife Tube Options for 10,000 Magnum™

  /products/31-magnum-for-highspeed-application/327-knife-tube-options-for-10000-magnum

  Check out all of the Knife Tube options for 10,000 Magnum available with Yetter Farm Equipment.