Find Sales Representative




Got innovative product ideas?

Testimonials

Real-world results are the benchmark by which any product is measured. However, instead of relying solely on what we have to say about our products, all Yetter customers are encouraged to share their stories and comments so that we can pass them along to you!

Category

Proven over thousands of acres

Categories: 71 Series Planter
John Reidhar and his sons run a 10,000-acre farming operation, and he also builds planters for use in small-scale farming and for food plots. He has found no substitute for the adaptability and effectiveness of the Yetter 71 Series Planter Units.&...read more »
John Reidhar, AR

Pleased with the cart for their 3,200 acres of corn and soybean

Categories: Coulter Carts
Bruce and Jerry Bergman have used the Yetter 2000-gallon All Steer High Capacity Cart on their family farm for the past two years. The first spring they used it behind a 24-row strip-till toolbar; the second spring behind a 24-row planter. The...read more »
Bruce Bergman - Real World Solutions, IA

Impressed with these units' durability

Categories: Residue Managers
"I am really pleased with these row cleaners, and so were the guys who put them on our 1250 International planter," Chris said of his 2967-053 Screw Adjust Residue Managers from Yetter. "Previous row cleaners fell apart, and we ha...read more »
Chris Huegerich, IA

Better Stalk Stance With Screw Adjust Residue Managers

Categories: Residue Managers
Doug Gronau experienced high winds that flattened parts of his corn to the ground. Because of the damage, he was not able to harvest the flattened stalks; therefore, come planting season, Gronau planted directly into the mangled stalks without any ti...read more »
Doug Gronau, IA

Our goal is to get seed in a precise location

Categories: Residue Managers
Gary Kunde searched for the best residue manager to handle several thousand acres of beans and narrow-row corn, including some continuous corn. He found it in Yetter Manufacturing's Narrow Row Residue Managers with optional SharkTooth®...read more »
Gary Kunde, IA

Residue managers create a better stand of corn

Categories: Residue Managers
Jerry Groth is always looking for ways to get a better stand of corn on his mostly no-till farm, which is why he decided to test out the Yetter 2967-035 TitanTM Residue Manager with SharkTooth Wheels® in a side-by-side comparison. On a 1,0...read more »
Jerry Groth, IA

Stalk Devastator Leaves Fields in Impressive Condition

Categories: Stalk Roller
Jim Ries used a chopping corn head for several years and was not impressed with the performance. Ries found that the chopping corn head required high maintenance and in-season costs, which led to downtime for repairs. For the fall of 2014, Ries pu...read more »
Jim Ries, IA

I like their flexibility.

Categories: Strip Till
In his third year of working with them, Kevin Reed is very happy with his 2984 Mavericks, which he has mounted on a 3-point toolbar. He uses the Mavericks to side-dress an anhydrous fertilizer application on his 1,500 acres of corn. “I l...read more »
Kevin Reed, IA

My Yetter residue managers cleared the path to higher yields

“My Yetter 2967 Screw Adjust Residue Managers cleared the path to higher yields in my soybeans. I added them to my 1790 John Deere planter with 15-inch spacing. My no-till soybean yields were an award-winning 89.77—the fourth high...read more »
Kurt Oathout, IA

The strips were still visible in the spring

Categories: Strip Till
For four years, Brent Schmitz tried to make strip-till work with little success. "We'd run the strips in the fall, but then in the spring, we could never see where we'd been." Looking for a strip-till tool with a residu...read more »
Brent Schmitz, IL

Better seedbed with Stalk Devastator

Categories: Stalk Roller
Like many farmers, Dave Hunt has been plagued with stubble damage to his tires. In the fall of 2011, he faced this challenge with a new tool at his side—the Yetter 5000 Stalk Devastator. With the Devastator mounted on his eight-row corn ...read more »
Dave Hunt, IL

Results satisfied even our most particular producer

Categories: Residue Managers
"Farmers who have been running chisel plows want to be able to succeed in corn-on-corn with no tillage, and this prompted us to look at an anhydrous toolbar that could get through residue. We turned to Yetter Manufacturing's SharkToot...read more »
Doug Long, IL

Air Adjust Yields Impressive Results

Categories: Residue Managers
After years of having to get out of the cab to make adjustments, Grant Curtis decided he wanted the ability to adjust his residue managers from the tractor seat quickly and easily. Grant Curtis chose the Yetter 2940 Air Adjust Residue Manager for his...read more »
Grant Curtis, IL

Saving Time with Yetter 2940 Air Adjust Series

Categories: Residue Managers
  “The nice thing about the 2940 Air Adjust Residue Managers is you can change them on the fly-when you come across a waterway or headland, just hit a button and they come up.” Said Justin Martz who farms corn and soybeans on Larson ...read more »
Justin Martz, Larson Farms, IL

It did a really nice job of laying the stalks over, crushing them, and starting the decay process

Categories: Stalk Roller
For the 2011 harvest, Mike France used the 5000 Stalk Devastator attached to his corn head to knock over and crush corn stalks, testing its effectiveness for Yetter. “When Yetter came at the end of the harvest to take it off, I told them I w...read more »
Mike France, IL

Devastator the answer to tough corn stalks

Categories: Stalk Roller
“It’s the best purchase we made this year,” said Matt Blankenship of Pioneer Seed & Blankenship Farms, referring to the Yetter 5000 Stalk Devastator. “Today’s corn stalks are so much tougher, but the Devastator wa...read more »
Matt Blankenship, IL

"The Paddle Wheel Rows Are Just Smoother"

  Mitchell Corbin runs Yetter Paddle Wheels on his 36-row, 20” John Deere planter. “Our soils are heavy clay, so sidewall compaction is a concern. The Paddle Wheels don’t move too much dirt and are not too aggressive. They do a...read more »
Mitchell Corbin, IL

Made a world of difference

Categories: Residue Managers
Adding SharkTooth® wheels to his Titan™ residue manager made a world of difference to Paul Butler. Paul's fields, which he plants half in beans and half in corn, grew too weedy over the winter to run straight wheels through...read more »
Paul Butler, IL

Worked extremely well

Categories: Residue Managers
"The residue managers from Yetter Manufacturing worked extremely well. I had gone through the field with a chisel plow, and went back to break up clods and heavy trash using the SharkTooth® Wheels. No matter how heavy the trash got, t...read more »
Roger Eckland, IL

Combo works great in all conditions.

Stan and Don Grigg of Toulon, Illinois, use Yetter coulter/residue manager combinations on their planters. According to Stan, "The combo works great in all conditions. It's so easy to go from lock down to float mode, and I love being ...read more »
Stan and Don Grigg, IL

Used the same Yetter adjustable residue managers for 10 years

Categories: Residue Managers
Steve Fulling has used the same Yetter adjustable residue managers for 12 years. Even though Steve does not farm a lot of acres and plants into tool-friendly clay soil, he has been impressed with their longevity. "They've been trouble...read more »
Steve Fulling, IL

Not only threw corn residue out of the way, but were a huge asset on soybean stubble as well.

Categories: Residue Managers
"My fertilizer dealer suggested I add Yetter SharkTooth® Wheels to my DMI toolbar to move residue and prepare for corn-on-corn application. They not only threw corn residue out of the way, but were a huge asset on soybean stubble as w...read more »
Tim Carlson, IL

Selling Yetter Farm Equipment products for 15 years

I've been selling Yetter Farm Equipment products for 15 years, and every year Yetter has adapted its products to meet the current needs of producers. I think this flexible and progressive culture has energized Yetter for the past 80 years,...read more »
Aaron Mattern - Sales Representative for CFC Distributing, IN

I can get the fertilizer down deep where the moisture is going to be

Categories: Strip Till
A retired biology professor from Western Illinois University, Ben Stidd converted a John Deere planter for strip till using Yetter 2984 Series Generation II Maverick™ Openers. Initially, he started with a four-row unit but has since exte...read more »
Ben Stidd, IN

Devastator clears the way for spring planting

Categories: Stalk Roller
David Dimmich and his son Zachary purchased a Yetter 5000 Stalk Devastator for use during the 2012 fall harvest on their farm in Indiana, about 100 miles south of Chicago. They plant no-till soybeans after corn, and had frequently experienced prob...read more »
David and Zachary Dimmich, IN

Devastators save tire wear on my primary tillage tractors

Categories: Stalk Roller
Next year, Mike Cline will be running Yetter 5000 Stalk Devastators on all three of his John Deere S680 12-row combines. They’ll cover 6,500 corn-on-corn acres, successfully knocking down stubble and preventing tire damage. “We really ...read more »
Michael Cline, IN

Yetter 5000 Stalk Devastator Successfully Knocking Down Stubble and Preventing Tire Damage

Categories: Stalk Roller
  Mike Cline runs Yetter 5000 Stalk Devastators on all three of his John Deere S680 12-row combines. They cover 6,500 corn-on-corn acres, successfully knocking down stubble and preventing tire damage. “We really started seeing problems wit...read more »
Michael Cline, IN

Air Adjust saves time, improves planting effectiveness

Categories: Residue Managers
“The Air Adjust units probably saved me a good three hours between my two 16-row Case planters in that initial field,” said Drew Barnes, who used 2940 Air Adjust Residue Managers from Yetter for the first time this spring. “You c...read more »
Drew Barnes, KS

Less Disturbance With Yetter 2987 Magnums

  When the Kissingers began to transition their farming operation to no-till, making the right equipment selection was a big deal especially for fertilizer application. “We were using a rolling cutter and a shank to apply, bu there was jus...read more »
Ted and Todd Kissinger, Kissinger Farms, KS

Air Adjusts worth every dollar

Categories: Residue Managers
“With the push of a button, I can now adjust my residue managers whenever I need to. They are worth every dollar.” ...read more »
Ronnie Andrews, MD

Vipers Keep the Fertilizer In the Ground

  In central Michigan’s rolling hills, Lee Thelen encounters just about every type of soil from heavy clay, to loam, to sand. He needed a fertilizerapplication tool that could stay in the ground in changing conditions. He found it- in the ...read more »
Lee Thelen, MI

Encounters just about every type of soil, from heavy clay to loam to sand

In central Michigan's rolling hills, Lee Thelen encounters just about every type of soil, from heavy clay to loam to sand. He needed a fertilizer application tool that could stay in the ground in changing conditions. He found it--in the 30...read more »
Lee Thelen, MI

I have been very happy with the Double Discs

Rich Maurer uses Yetter 2962 Double Disc Fertilizer Openers to apply liquid fertilizer when he plants 2,700 acres of corn and sugar beets in Michigan. Rich’s 24 Double Disc Openers are row-unit mounted, and he plants his beets in 30-inch row...read more »
Rich Maurer, MI

Durable Double Disc Fertilizer Openers

  Rich Maurer uses Yetter 2962 Double Disc Fertilizer Openers to apply liquid fertilizer when he plants  2,700 acres of corn and sugar beets. Rich’s 24 Double Disc Openers are row-unit mounted, and he plants 30-inch rows. “We&r...read more »
Rich Maurer, MI

Durable product, and I wanted the SharkTooth

Categories: Residue Managers
Kevin Keopp is one of a growing number of producers switching to twin-row corn. "Kinze just started building twin-row planters," said Kevin. "Not too long ago, machines for twin rows had to be custom built." Kevin did custo...read more »
Kevin Keopp, MN

We were looking for a setup that could work in both tillage systems.

Categories: Closing Wheels
Kevin Antrim of Antrim Farms has experimented with many combinations of closing wheels, including OEM rubber wheels and add-ons from several manufacturers. "Some seemed to just throw out more dirt than anything." "Our oper...read more »
Kevin Antrim, IN

Saved Several Thousand Dollars with Maverick HR Plus Units

Categories: Strip Till
  Paul Hamann has found that it pays to be creative when planting strip-till corn-on-corn. He estimates he saved several thousand dollars by redesigning and shortening a used ridge-till cultivator bar. Paul outfitted the strip-till bar with Yett...read more »
Paul Hamann, MN

Strip-till an asset in dry years

Paul Hamann has found that it pays to be creative when planting strip-till corn-on-corn. By constructing his own strip-till bar and fertilizer cart with his son and brother, he estimates he saved several thousand dollars. By redesigning and sh...read more »
Paul Hamann, MN

The reliability of this unit has been exceptional

Categories: Seed Handling
Minnesota farmer Rick Loll and his sons have used a Seed Jet II™ from Yetter Farm Equipment for about ten years. “I think we’ve only changed one belt—and added gas,” said Rick. “The reliability of this unit has ...read more »
Rick Loll, MN

Looked around for years

"I looked around for years for something like these fertilizer openers so that I could apply fertilizer without wrecking the seed trench," said Rob Goblirsch. After he put Yetter Farm Equipment's 2968 Row-Unit Mount In-Between Fe...read more »
Rob Goblirsch, MN

I can just fly with this thing

Steve Graham knows how to optimize the yield potential in his corn-on-corn acres. “I’ve tried a lot of stuff,” he said. “The best solution I have found is a split fertilizer application. I spray on 32% liquid nitrogen right...read more »
Steve Graham, MN

Saw great results this year

Categories: Residue Managers
Vance Johnson saw great results this year with the Yetter 2967 residue managers and optional SharkTooth® wheels. The combination attachment worked with his planter and powered through tough corn residue so he could plant 360 acres of sugar...read more »
Vance Johnson, MN

Paddle Wheels combat sidewall compaction, manage soil erosion

Mitchell Corbin runs Yetter Paddle Wheels on his 36-row, 20” John Deere planter, and he’s gotten some comments on them. “They don’t look like anything else I’ve had.” When his dealer suggested he try them out to...read more »
Mitchell Corbin, MO

Built with quality construction

Categories: Residue Managers
"The Yetter Residue Manager is built with quality construction. It really complements your planter's performance in your strip-tillage system. It provides a wide range of adjustments and it is durable. I am very pleased with the resul...read more »
Rodney Thompson, MO

A powerful tool for dealing with the trash left behind after a crop

Categories: Residue Managers
Brandon Wilson knows cotton. He helps farm over 12,000 acres of it for AMD Farms. He also knows that Yetter SharkTooth® wheels coupled with 2967 residue managers are a powerful tool for dealing with the trash left behind after a crop. He a...read more »
Brandon Wilson, NC

Do a great job closing the furrow

Categories: Closing Wheels
"Our soil is Fargo clay," said Kevin Onchuck, who farms with his brother Dan. "It's real sticky. We used to be able to walk behind our planter, look down at the furrow, and see the seed. Rubber closing wheels were not closin...read more »
Kevin Onchuck, ND

Residue managers move trash

Difficult wheat residue was the reason Robert Schaefer decided to try the 2967-039 Frame Mounted Floating Residue Managers on his planter and strip-till unit. After three or four years of use, Robert is very happy with the setup—“it ju...read more »
Robert Schaefer, ND

Developed over 200 wildlife-habitat planters made from Yetter products

Categories: 71 Series Planter
Brent Jungman of Jungman Wildlife Supply has developed over 200 wildlife-habitat planters made from Yetter products. Using the 71 Planter Unit with the 2967 Screw Adjust Residue Managers mounted on the front of the planter, Jungman has created...read more »
Brent Jungman, NE

Have been a game changer

Doug Brandt custom applies ammonia in the fall for customers of the Nebraska-based Farmers Cooperative. He says the 2987 Magnum for Fertilizer Application from Yetter have been a game changer. "We've picked up business because o...read more »
Doug Brandt, NE

We don't lose nitrogen through nitrification

"We concluded that for our no-till operation, we needed to get fertilizer deeper into the ground. Because the Yetter injection system placed the fertilizer in the ground, we don't lose nitrogen through nitrification or because it sits...read more »
Eric Maaske, NE

Agronomist, Nebraska farmer, and Yetter equipment dealer

"As a Yetter dealer, I maintain a close relationship with the Yetter team to stay up to date on the newest products and to discuss industry news. But when I need information quickly and a phone call is not an option, I turn to the Yetter ...read more »
Jerry Baysinger, NE

 

When Lynn Lisius switched from a knife system to the Yetter Magnum for anhydrous application in the fall of 2013, he saw immediate improvements. “It sealed very well, even though it had been a dry year,” he said. He also noticed th...read more »
Lynn Lisius, NE

I wanted a custom-built, small planter.

Categories: 71 Series Planter
Three years ago, as a first year farmer with a small acreage, Mike Sottile turned to Yetter Manufacturing for the company's 71 Series Planter Units. "I went to my local equipment dealer looking for a reasonable planting setup. I wante...read more »
Mike Sottile, NJ

Magnums are a versatile, low-disturbance option

Mounted on a Progressive 60’ toolbar, Brian Watkins from Watkins Farms used Yetter 2987 Magnums for Fertilizer Application to place P and K on his strip-till and no-till corn during the fall.“We placed the fertilizer in the ground abou...read more »
Brian Watkins, OH

The Vipers are heavier than the others

Jim Rogers swapped his fertilizer coulters for Yetter Farm Equipment’s 3000 Viper® II With Gauge Wheels because they looked more heavy-duty than a leading competitor’s best model, and he was looking for more accurate fertilizer pla...read more »
Jim Rogers, OH

Great job of lifting and redistributing the residue

Categories: Rotary Hoes
"I tested a roller harrow and compared the results to that of the Yetter Rotary Hoe. I like the Rotary Hoe better. It does a great job of lifting and redistributing the residue, but it doesn't break off and level the crowns and standi...read more »
Les Seiler, OH

Research project has been getting good results

Categories: Manure Application
A Pennsylvania research project has been getting good results using 2986 Avenger coulters from Yetter Farm Equipment to inject liquid dairy manure in corn test plots. "We're looking for ways to incorporate manure with minimal di...read more »
Doug Beegle, PA

Pennsylvania Research Project Getting Good Results From Yetter Farm Equipment

Categories: Manure Application
  A Pennsylvania research project had been getting good results using 2986 Avenger coulters from Yetter Farm Equipment to inject liquid dairy manure in corn test plots. “We’re looking for way to incorporate manure with minimal distu...read more »
Doug Beegle, PA

Works well for the custom manure application business

Categories: Manure Application
Lehman Ag Service Inc. has only had its Yetter 2986 Avenger units since May, but is pleased with the work they do. Yetter Farm Equipment's manure injection system works well for the custom manure application business. "We're...read more »
Josh Lehman, PA

The screw adjust is a pretty nice feature

Categories: Residue Managers
Mike Marquardt invested in his planter and its attachments for the 2007 season. He purchased Yetter 2967 residue managers with the screw adjust feature, setback kits, and SharkTooth® wheels for his John Deere 1750 6-row planter. The setbac...read more »
Mike Marquardt, PA

Heavy enough to move the residue out of the way without moving any soil

Categories: Residue Managers
"I was extremely pleased with the new Yetter Titan™ residue managers that I put on my CIH planter this past year. The Titans™ were heavy enough to move the residue out of the way without moving any soil. I really liked the hei...read more »
Alan Sims, TN

More Consistent Stand of Corn

Categories: Residue Managers
  When Don Norwood told Yetter he needed a floating residue manager for his highly erodible no-till farm in the Tennessee hills, Yetter listened.    The previous year, Don had purchased a used 8-row Monosem twin planter with fixed Yet...read more »
Don Norwood, TN

A floating residue manager for this planter is an absolute must

Categories: Residue Managers
In 2008, when Don Norwood told Yetter he needed a floating residue manager for his highly erodible no-till farm in the Tennessee hills, Yetter listened. The previous year, Don had purchased a used 8-row Monosem twin planter with fixed Ye...read more »
Don Norwood, TN

The dominant force in planter attachments

Categories: Residue Managers
"Yetter is the dominant force in planter attachments," said Texas farmer James Ripple. "The Yetter E-Series residue managers with SharkToothR wheels have greatly increased my productivity. They almost eliminated the need to stop...read more »
James Ripple, TX

Has not made anything obsolete-they don't need to

Categories: Strip Till
John Friesenhahn has been using Yetter coulters for more than 20 years. After they needed only routine bearing replacements, it is no surprise that he chose to not only purchase more Yetter products, but also to sell them to other area produce...read more »
John Friesenhahn, TX

Efficient fertilizer banding with the Viper

“Covering 300 acres a day at 7 mph with the Viper fertilizer coulter allowed me to band fertilizer where my crop needs it."...read more »
John Perryman, TX

Immediately ordered seven more

In 2010, after he saw a Yetter Farm Equipment magazine ad, Sixtus Laskowski ordered one Yetter 2968 Row Mount In Between Fertilizer Opener for his thousand-acre farm near Stockdale, Texas. He mounted it on his 7300 John Deere planter, tested i...read more »
Sixtus Laskowski, TX

A cover crop solution

Categories: Residue Managers
“No more trouble for me in cover crops. The Sharktooth Wheel is a must for my no-till operation.” ...read more »
Fred Holland, VA

Stand behind their investment

William and Robb Hinton stand behind their investment in the Yetter 3600 toolbar. The Hintons are a father and son team farming in Virginia's Northern Neck. This location is part of the Chesapeake Bay watershed and is very sensitive to env...read more »
Robb Hinton, VA

Ready for use when needed

When the need arises for a particular tool, Allan Brooks likes to know he has it available in his toolbox. That's the way he feels about his Yetter 2910 Series Heavy Duty Coulters. The coulters, mounted on a 16-foot toolbar, are ready for ...read more »
Allan Brooks, WI

Right Management Plan to Meet His Potential

Categories: Residue Managers
  John Simon farms a small acreage near the Rock River in Jefferson County, Wiscounsin. Where large scale producers saw land with little potential for profitability, John was ready for the challenge. With the right management plan, his acreage i...read more »
John Simon, WI

The SharkTooth Wheels clear a perfect path

Categories: Residue Managers
John Simon farms a small acreage near the Rock River in Jefferson County, Wisconsin. Where large scale producers saw land with little potential for profitability, John was ready for the challenge. With the right management plan, his acreage is rea...read more »
John Simon, WI
 

Find Us On:

PO Box 358 109 S. McDonough
Colchester, Illinois 62326 USA
309.776.4111
800.447.5777 (toll free)
309.776.3222 (fax)

Copyright Yetter Manufacturing Inc. Permission must be obtained in advance to reproduce content from this site.