"Hunt Farms has been using the Magnum for nearly a decade to side-dress corn at 8–10 mph between the V2 and V6 stages. “We decided on the Magnum because it allows us to get nitrogen to the plant during the growing season in a short window of time. Side-dressing 4,000 acres each y...dquo;
rn"Our soil is Fargo clay," said Kevin Onchuck, who farms with his brother, Dan. "It's real sticky. We used to be able to walk behind our planter, look down at the furrow, and see the seed. Rubber closing wheels were not closing the furrow at all.rn"We added a Yetter 6200 Cast Spike Closing ...t."rn
The Yetter 6200-036 Twister Cast Ring replaces factory rubber closing wheels to improve seed furrow closure. Pairs with John Deere, White, and newer Kinze planters.
rnFor four years, Brent Schmitz tried to make strip-till work with little success. "We'd run the strips in the fall, but then in the spring, we could never see where we'd been."rnLooking for a strip-till tool with a residue manager, Brent tried the Yetter 2984 Maverick™ HR Plus® wi...e."rn
rnrn"Our operation is a small family farm. We do some continuous corn, and we tend to cut high to leave as much of the stalk as we can. We had a 9450 combine that we loved, and we had the Devastators on the 693. Easiest trips we've ever made! It shattered the stalk, then we had some ra...nbsp;
Hello from YetterCo.com! This website uses cookies.
We use cookies to continuously improve our services and visitor experience. Additionally, we set cookies for visitors on social media sites to track performance. By continuing on this website or clicking "Ok" we will assume that you have read this information and consent to receive cookies on our website. For more information visit our website's Privacy Policy.
