Sorry! Page not found!

Perhaps you were looking for...

Search

• How do I properly set up the fertilizer coulter with a rear knife?

  /customer-support/faqs?id=13

  Center the blade on the hub so that it is concentric when it turns. Place the knife top up to the coulter blade so the knife and coulter blade just slightly contact each other at the tip. Then, as the coulter blade rotates up the knife, you want to have a gradual gap between the knife and co...lade.

• Air Adjust yields impressive results

  /products-testimonials?id=120

  After years of having to get out of the cab to make adjustments, Grant Curtis decided he wanted the ability to adjust his residue managers from the tractor seat quickly and easily. Grant chose the Yetter 2940 Air Adjust™ Residue Manager for his operation. His residue managers are mount...rant.

• Developed over 200 wildlife-habitat planters made from Yetter products

  /products-testimonials?id=31

  rnBrent Jungman of Jungman Wildlife Supply has developed over 200 wildlife-habitat planters made from Yetter products. Using the 71 Planter Unit with the 2967 Screw Adjust Residue Managers mounted on the front of the planter, Jungman has created a unique design. "It took a little trial and e...t."rn

• 5000-060 thru -063 Stalk Devastator™ – Torsion Pivot Model for Case-IH (2606, 2608, 4206, 4406, 4408) & New Holland (99C, 980CR, 980CR) Folding or Rigid Corn Heads – 20", 22", 30" Spacing – Chopping or Non-Chopping

  /customer-support/manuals?id=178

  Corn Stalk Roller for  6-, 8-, & 12-Row Case IH, New Holland Corn Head

• We don't lose nitrogen through nitrification

  /products-testimonials?id=39

  rn"We concluded that for our no-till operation, we needed to get fertilizer deeper into the ground. Because the Yetter injection system places the fertilizer in the ground, we don't lose nitrogen through nitrification or because it sits on the top of the residue. They've provided a big cost ...s."rn

• Yetter Strip Freshener makes spring strip-till a lot less stressful

  /products-testimonials?id=125

  "Spring strip-till has proven challenging for us in the past. We want to create an ideal seedbed just hours ahead of planting with no previous tillage.  Since we face the challenges of wet soil and increasing amounts of residue, we wanted a unit that was less restrictive of residue...nce."

• How can I improve seed-to-soil contact?

  /customer-support/faqs?id=8

  If the planter unit and/or frame-mounted coulters are running too deep, properly adjust coulter height and ensure that in operation the planter hitch is set to the correct height (consult the planter's operator manual). If the double disc openers are excessively worn, replace the openers. If... dry.

• 2967-033A Floating Row Cleaner for Fertilizer Toolbars, 2967-038A Floating Row Cleaner – Case IH/HCS Shanks, 2967-039A Row Cleaner for Fertilizer Toolbars

  /customer-support/manuals?id=71

  2967-033A Floating Row Cleaner for Fertilizer Toolbars, 2967-038A Floating Row Cleaner – Case IH/HCS Shanks, 2967-039A Row Cleaner for Fertilizer Toolbars

• 2940 Electric Compressor Manual (Years 2012-2015)

  /customer-support/manuals?id=132

  Includes short row cleaners and row cleaner/coulter combornIncludes models 2940-001, 002, 003, 004, & 010 using a Yetter Electric Compressor

• Gets nitrogen to the plant in a short window of time

  /products-testimonials?id=157

  "Hunt Farms has been using the Magnum for nearly a decade to side-dress corn at 8–10 mph between the V2 and V6 stages. “We decided on the Magnum because it allows us to get nitrogen to the plant during the growing season in a short window of time. Side-dressing 4,000 acres each y...dquo;