Our facilities will be closed on March 29th in observance of Good Friday. We wish you all a Happy Easter!
Yetter Farm Equipment

3400/3500 Standard Rotary Hoe

Call Yetter

Overview

The Yetter 3400/3500 Standard Rotary Hoe has rescued many crops since its introduction. It is the insurance policy that saves emerging plants as the spoon-bill wheels break open soil crust.

The Standard Rotary Hoe is used to take out weeds without the use of herbicides, aerate wet residue before planting, and help prevent blowing sand. It is designed for conventional and min-till farming operations.

Features

  • Short- and long-cast arms stagger wheels 7" to facilitate residue flow
  • Wheels spaced on approximately 3 1/4" centers across width of machine
  • Spoon-bill wheel teeth are mounted on individual, spring-cushioned cast arms, allowing better soil contact with each wheel
  • Low horsepower requirements with operating speeds of 7-10 mph
  • Available with a wide array of options to fit the needs of your operation (gauge wheels, helper springs, trash guards, min-till conversion, and rear parking stand for folding models; see options tab above for details)
  • Widest models (see model details) feature double 7" x 7" toolbar design for added strength
  • Rigid (3400 model) available in 12', 15', 21', 28', 30', and 34' widths
  • 180° flat-folding (3500 model) available in 25', 28', 30', 34', 41', 46', 54', and 60' widths
  • Breaks up crusted soil to improve emergence
  • Mechanically rips out young weeds
  • Aerates and fluffs soil around growing plants
  • Incorporates herbicides and small seeds in one fast pass

Specs

  • Hitch: Mounted three-point category II/III on 12' to 46' models; category III/IV on 54' and 60' models
  • Hoe wheels: 21" diameter hoe wheels equipped with sealed gothic arch ball bearing
  • Riveted wheel assembly: 16 forged, self-sharpening, spoon-bill teeth
  • Down pressure: 18 lbs. with standard springs
  • Cylinders: 3000 psi with hoses on folding models
  • Safety features: SMV emblem, reflectors, light kit
  • Convenience features: Operator shield and parking stands
3400 Rigid

Model

Toolbar Dimensions

Gang
Sections

Working
Width

Transport
Width

Row
Configuration

Quantity of
Hoe Wheels

Weight
(lbs.)

3412

4" x 4" x 1/4" x 149"

3

12'-5"

12'-5"

4R30, 6R22

42

1,441

3415

4" x 4" x 1/4" x 184"

4

15'-4"

15'-4"

4R40, 6R30, 8R22

52

1,681

3421

5" x 7" x 1/4" x 255"

6

21'-2"

21'-2"

6R40, 8R30, 12R20

72

2,231

3428

5" x 7" x 1/4" x 338"

8

28'-2"

28'-2"

8R40, 16R20

96

2,851

3430

5" x 7" x 1/4" x 366"

8

30'-6"

30'-6"

10R36, 12R28, 12R30

104

3,211

3434

5" x 7" x 1/4" x 408"

8

34'-0"

34'-0"

10R40, 14R28, 18R22

116

3,957

 

3500 Folding

Model

Toolbar Dimensions

Gang
Sections

Working
Width

Transport
Width

Row
Configuration

Quantity of
Hoe Wheels

Weight
(lbs.)

3525

Center: 7" x 7" x 1/4" x 174"

Wings: 7" x 7" x 1/4" x 63"

4

25'-0"

14'-10"

8R36

86

3,499

3528

Center: 7" x 7" x 1/4" x 167"

Wings: 7" x 7" x 1/4" x 84"

8

28'-0"

14'-3"

8R40, 16R20

96

3,640

3530

Center: 7" x 7" x 1/4" x 181"

Wings: 7" x 7" x 1/4" x 91"

8

30'-2"

15'-5"

12R30, 12R28, 16R22

104

3,904

3534

Center: 7" x 7" x 1/4" x 209"

Wings: 7" x 7" x 1/4" x 98"

8

33'-10"

17'-9"

10R40, 14R28, 18R22

116

4,799

3541

Center: 7" x 7" x 3/8" x 245"

Wings: 7" x 7" x 1/4" x 123"

9

40'-10"

20'-9"

12R40, 16R30, 24R20

140

5,269

3546

Center: 7" x 7" x 3/8" x 303"

Wings: 7" x 7" x 1/4" x 123"

9

45'-10"

25'-9"

14R36, 18R30, 24R22

158

5,732

3554

Center: 7" x 7" x 1/2" x 334"

Wings: 7" x 7" x 3/8" x 156"

12

54'-2"

29'-0"

16R40, 18R36, 32R20

186

8,707

3560

Center: 7" x 7" x 1/2" x 386"

Wings: 7" x 7" x 3/8" x 170"

13

60'-6"

32'-5"

20R36, 24R30,26R28

208

10,299

Great job of lifting and redistributing the residue

"I tested a roller harrow and compared the results to that of the Yetter Rotary Hoe. I like the Rotary Hoe better. It does a great job of lifting and redistributing the residue, but it doesn't break off and level the crowns and standing stalks."

Les Seiler • OH

3400 and 3500 Series Rotary Hoe

3400/3500 Series Rotary Hoe

Truss Kit for 28' (3500-001) and 30' (3500-002)

  • Bolt-on kit that enables a folding 3528 or 3530 to function as a rigid toolbar
  • Truss constructed from 3" x 3" x 3/16" wall square tubing

Toolbar Gauge Wheels (3500-108)

  • Includes 2 gauge wheel assemblies equipped with 15" wheels
  • Fits on 5" x 7" and 7" x 7" toolbars
  • Frame gauge wheels maintain rotary hoe frame at a constant level in respect to the ground contour
  • Recommended tire size: 205/70R15 or equivalent

NOTE: Tires are not included with kit

Wing Lock Kit (3500-107)

  • Designed to fit 25', 28', 30', 34', 41', and 54' flat-folding Rotary Hoes
  • Prevents wings from floating up in certain operating conditions
  • Allows complete operator control from the tractor seat
  • Locks the wings in horizontal position when desired
  • Will allow the wings to float by simply retracting the wing lift cylinders slightly
  • Weight transfer system from center section to wings to improves penetration

Rear Parking Stand (3500-135)

  • Required when storing rotary hoe in folded position to help stabilize the implement
  • Includes 2 stands per kit
  • Fits 7" x 7" square toolbar

Helper Spring Kit (3400-172)

  • Provides additional down pressure to rotary hoe wheels
  • Increases down pressure from 18 lbs. to 36 lbs.
  • Enables rotary hoe wheels to crack extra-hard crusted soils
  • Installs over existing spring and axle
  • One spring kit fits one wheel

Trash Guard (3400-147)

  • Clears residue and clods
  • Prevents corn root balls from plugging between wheels
  • Prevents wheels from locking or dragging
  • Used on standard rotary hoes only (not required on min-till rotary hoe)
  • One guard fits one wheel

Min-Till Conversion Kit (3400-170)

  • Enables a standard rotary hoe to be converted to min-till version
  • Increases separation of the two rows of rotary hoe wheels to improve residue flow
  • Increase the stagger from 7" to 21"

NOTE: When equipping a 3400 or 3500 Series with Min-Till kit, the helper spring kit (3400-172) must be added to the seven (7) min-till arms above the OSHA screen in the folding position.

Hello from YetterCo.com! This website uses cookies.

We use cookies to continuously improve our services and visitor experience. Additionally, we set cookies for visitors on social media sites to track performance. By continuing on this website or clicking "Ok" we will assume that you have read this information and consent to receive cookies on our website. For more information visit our website's Privacy Policy.