Our facilities will be closed on March 29th in observance of Good Friday. We wish you all a Happy Easter!
Yetter Farm Equipment

FAQs

Below are answers to some of the questions most commonly asked by Yetter customers. If you have a question that is not addressed here, please submit it using our online contact form or call a Yetter customer service representative at 800-447-5777.

Category -

Categories: 2967 | Show All Categories

Currently, the Stalk Devastator is available for most corn head models including 20", 22" & chopping heads.   

Categories: 2967 | Show All Categories

  • Planter is not level—raise the planter drawbar
  • Too much row unit down pressure
  • Frame height is too low—refer to planter operator’s manual
  • Soil is very loose

Categories: 2967 | Show All Categories

  • Residue is hairpinning—too shallow
  • Soil is being moved—too deep
  • You see a wheel slow down once in a while—set about right

Categories: 2967 | Show All Categories

Yes, you can do whichever best fits your operation. If you take the seal out, you must grease every 50 hours. If you leave the seal intact, fill the wheel assembly with grease before using. No need to grease again until you replace the bearing.

Categories: 2967 | Show All Categories

In most conditions, mount the wheels offset in the front hole and rear hole. In some conditions, the wheels perform best when mounted in one front hole and one middle hole.

Hello from YetterCo.com! This website uses cookies.

We use cookies to continuously improve our services and visitor experience. Additionally, we set cookies for visitors on social media sites to track performance. By continuing on this website or clicking "Ok" we will assume that you have read this information and consent to receive cookies on our website. For more information visit our website's Privacy Policy.